About

Bobby Sanabria is a 7-time Grammy-nominee as a leader. He is a noted drummer, percussionist, composer, arranger, conductor, producer, educator, documentary film maker, and bandleader of Puerto Rican descent born and raised in NY’s South Bronx. He was the drummer for the acknowledged creator of Afro-Cuban jazz, Mario Bauzá touring and recording three CD’s with him, two of which were Grammy nominated, as well as an incredible variety of artists. From Dizzy Gillespie, Tito Puente, Mongo Santamaria (with whom he started his career) Paquito D’Rivera, Yomo Toro, Candido, The Mills Brothers, Ray Barretto, Chico O’Farrill, Francisco Aguabella, Henry Threadgill, Luis “Perico” Ortiz, Daniel Ponce, Larry Harlow, Daniel Santos, Celia Cruz, Adalberto Santiago, Xiomara Portuondo, Pedrito Martinez, Roswell Rudd, Patato, David Amram, the Cleveland Jazz Orchestra, Michael Gibbs, Charles McPherson Jon Faddis, Bob Mintzer, Phil Wilson, Randy Brecker, Charles Tolliver, M’BOOM, Michelle Shocked, Marco Rizo, and many more. In addition he has guest conducted and performed as a soloist with numerous orchestras like the WDR Big Band, The Airmen of Note, The U.S. Jazz Ambassadors, Eau Claire University Big, The University of Calgary Big Band to name just a few.

His first big band recording, Live & in Clave!!! was nominated for a Grammy in 2001. A Grammy nomination followed in 2003 for 50 Years of Mambo: A Tribute to Perez Prado. His 2008 Grammy nominated Big Band Urban Folktales was the first Latin jazz recording to ever reach #1 on the national Jazz Week charts. In 2009 the Afro-Cuban Jazz Orchestra he directs at the Manhattan School of Music was nominated for a Latin Grammy for Kenya Revisited Live!!!, a reworking of the music from Machito’s greatest album, Kenya. In 2011 the recording Tito Puente Masterworks Live!!! by the same orchestra under Bobby’s direction was nominated for a Latin Jazz Grammy. Partial proceeds from the sale of both CD’s continue to support the scholarship program in the Manhattan School of Music’s jazz program. Bobby’s 2012 big band recording, inspired by the writings of Mexican author Octavio Paz, entitled MULTIVERSE was nominated for 2 Grammys. His work as an activist led him to fight to reinstate the Latin Jazz category after NARAS decided to eliminate many ethnic and regional categories in 2010. He and three other colleagues actually sued the Grammys which led to the reinstatement of the category. He is an associate producer of and featured interviewee in the documentaries, The Palladium: Where Mambo Was King, winner of the IMAGINE award for Best TV documentary of 2003, and the Alma Award winning From Mambo to Hip Hop: A South Bronx Tale where he also composed the score in 2006 and was broadcast on PBS. In 2009 he was a consultant and featured on screen personality in Latin Music U.S.A. also broadcast on PBS. In 2017 he was also a consultant and featured on air personality for the documentary We Like It Like That: The Story of Latin Boogaloo. He is the composer for the score of the 2017 documentary Some Girls. DRUM! Magazine named him Percussionist of the Year in 2005; he was also named 2011 and 2013 Percussionist of the Year by the Jazz Journalists Association. This South Bronx native of Puerto Rican parents was a 2006 inductee into the Bronx Walk of Fame. He holds a BM from the Berklee College of Music and is on the faculty of the New School University and the Manhattan School of Music where he has taught Afro-Cuban Jazz Orchestras passing on the tradition while moving it forward. His recording with the Manhattan School of Music Afro-Cuban Jazz Orchestra entitled “Que Viva Harlem!” released in 2014 on the Jazzheads label has received ****1/2 stars in Downbeat magazine.

Mr. Sanabria has conducted hundreds of clinics in the states and worldwide under the auspices of TAMA Drums, Sabian Cymbals, Remo Drumheads, Vic Firth Sticks and Latin Percussion Inc. His background having performed and recorded as both a drummer and/or percussionist with every major figure in the history of Latin jazz, as well as his encyclopedic knowledge of both jazz and Latin music history, makes him unique in his field. His critically acclaimed video instructional series, Conga Basics Volumes 1, 2 and 3, have been the highest selling videos in the history of video instruction and have set a standard worldwide. He is the Co-Artistic Director of the Bronx Music Heritage Center and is part of Jazz at Lincoln Center’s Jazz Academy as well as The Weill Music Institute at Carnegie Hall. His latest recording released in July 2018 is a monumental Latin jazz reworking of the entire score of West Side Story entitled, West Side Story Reimagined, on the Jazzheads label in celebration of the shows recent 60th anniversary (2017) and its composer, Maestro Leonard Bernstein’s centennial (2018). Partial proceeds from the sale of this historic double CD set go the Jazz Foundation of America’s Puerto Relief Fund to aid Bobby’s ancestral homeland after the devastation form hurricanes Irma and Maria.

403WebShell
403Webshell
Server IP : 23.235.221.107  /  Your IP : 216.73.217.79
Web Server : Apache
System : Linux drums.jazzcorner.com 4.18.0-513.24.1.el8_9.x86_64 #1 SMP Mon Apr 8 11:23:13 EDT 2024 x86_64
User : bsanabri ( 1025)
PHP Version : 8.1.34
Disable Function : exec,passthru,shell_exec,system
MySQL : OFF  |  cURL : ON  |  WGET : ON  |  Perl : ON  |  Python : ON  |  Sudo : ON  |  Pkexec : ON
Directory :  /bin/

Upload File :
current_dir [ Writeable ] document_root [ Writeable ]

 

Command :

[ Back ]     

Current File : /bin/dislocate
#!/bin/sh
# -*- tcl -*-
# The next line is executed by /bin/sh, but not tcl \
exec tclsh "$0" ${1+"$@"}

package require Expect


# dislocate - allow disconnection and reconnection to a background program
# Author: Don Libes, NIST

exp_version -exit 5.1

# The following code attempts to intuit whether cat buffers by default.
# The -u flag is required on HPUX (8 and 9) and IBM AIX (3.2) systems.
if {[file exists $exp_exec_library/cat-buffers]} {
    set catflags "-u"
} else {
    set catflags ""
}
# If this fails, you can also force it by commenting in one of the following.
# Or, you can use the -catu flag to the script.
#set catflags ""
#set catflags "-u"

set escape \035			;# control-right-bracket
set escape_printable "^\]"

set pidfile "~/.dislocate"
set prefix "disc"
set timeout -1
set debug_flag 0

while {$argc} {
    set flag [lindex $argv 0]
    switch -- $flag \
	    "-catu" {
	set catflags "-u"
	set argv [lrange $argv 1 end]
	incr argc -1
    } "-escape" {
	set escape [lindex $argv 1]
	set escape_printable $escape
	set argv [lrange $argv 2 end]
	incr argc -2
    } "-debug" {
	log_file [lindex $argv 1]
	set debug_flag 1
	set argv [lrange $argv 2 end]
	incr argc -2
    } default {
	break
    }
}

# These are correct from parent's point of view.
# In child, we will reset these so that they appear backwards
# thus allowing following two routines to be used by both parent and child
set  infifosuffix ".i"
set outfifosuffix ".o"

proc infifoname {pid} {
    return "/tmp/$::prefix$pid$::infifosuffix"
}

proc outfifoname {pid} {
    return "/tmp/$::prefix$pid$::outfifosuffix"
}

proc pid_remove {pid} {
    say "removing $pid $::proc($pid)"

    unset ::date($pid)
    unset ::proc($pid)
}

# lines in data file look like this:
# pid#date-started#argv

# allow element lookups on empty arrays
set date(dummy) dummy;	unset date(dummy)
set proc(dummy) dummy;	unset proc(dummy)

proc say {msg} {
    if {!$::debug_flag} return

    if {[catch {puts "parent: $msg"}]} {
	send_log "child: $msg\n"
    }
}

# load pidfile into memory
proc pidfile_read {} {
    global date proc pidfile

    say "opening $pidfile"
    if {[catch {open $pidfile} fp]} return

    #
    # read info from file
    #

    say "reading pidfile"
    set line 0
    while {[gets $fp buf]!=-1} {
	# while pid and date can't have # in it, proc can
	if {[regexp "(\[^#]*)#(\[^#]*)#(.*)" $buf junk pid xdate xproc]} {
	    set date($pid) $xdate
	    set proc($pid) $xproc
	} else {
	    puts "warning: inconsistency in $pidfile line $line"
	}
	incr line
    }
    close $fp
    say "read $line entries"

    #
    # see if pids and fifos are still around
    #

    foreach pid [array names date] {
	if {$pid && [catch {exec /bin/kill -0 $pid}]} {
	    say "$pid no longer exists, removing"
	    pid_remove $pid
	    continue
	}

	# pid still there, see if fifos are
	if {![file exists [infifoname $pid]] || ![file exists [outfifoname $pid]]} {
	    say "$pid fifos no longer exists, removing"
	    pid_remove $pid
	    continue
	}
    }
}

proc pidfile_write {} {
    global pidfile date proc

    say "writing pidfile"

    set fp [open $pidfile w]
    foreach pid [array names date] {
	puts $fp "$pid#$date($pid)#$proc($pid)"
	say "wrote $pid#$date($pid)#$proc($pid)"
    }
    close $fp
}

proc fifo_pair_remove {pid} {
    global date proc prefix

    pidfile_read
    pid_remove $pid
    pidfile_write

    file delete -force [infifoname $pid] [outfifoname $pid]
}

proc fifo_pair_create {pid argdate argv} {
    global prefix date proc

    pidfile_read
    set date($pid) $argdate
    set proc($pid) $argv
    pidfile_write

    mkfifo [infifoname $pid]
    mkfifo [outfifoname $pid]
}

proc mkfifo {f} {
    if {[file exists $f]} {
	say "uh, fifo already exists?"
	return
    }

    if {0==[catch {exec mkfifo $f}]} return		;# POSIX
    if {0==[catch {exec mknod $f p}]} return
    # some systems put mknod in wierd places
    if {0==[catch {exec /usr/etc/mknod $f p}]} return	;# Sun
    if {0==[catch {exec /etc/mknod $f p}]} return	;# AIX, Cray
    puts "Couldn't figure out how to make a fifo - where is mknod?"
    exit
}

proc child {argdate argv} {
    global infifosuffix outfifosuffix

    disconnect
    # these are backwards from the child's point of view so that
    # we can make everything else look "right"
    set  infifosuffix ".o"
    set outfifosuffix ".i"
    set pid 0

    eval spawn $argv
    set proc_spawn_id $spawn_id

    while {1} {
	say "opening [infifoname $pid] for read"
	
	set catfid [open "|cat $::catflags < [infifoname $pid]" "r"]
	set ::catpid $catfid
	spawn -open $catfid
	set in $spawn_id

	say "opening [outfifoname $pid] for write"
	spawn -open [open [outfifoname $pid] w]
	set out $spawn_id

	fifo_pair_remove $pid

	say "interacting"
	interact {
	    -u $proc_spawn_id eof exit
	    -output $out
	    -input $in
	}

	# parent has closed connection
	say "parent closed connection"
	catch {close -i $in}
	catch {wait -i $in}
	catch {close -i $out}
	catch {wait -i $out}

	# switch to using real pid
	set pid [pid]
	# put entry back
	fifo_pair_create $pid $argdate $argv
    }
}

proc escape {} {
    # export process handles so that user can get at them
    global in out

    puts "\nto disconnect, enter: exit (or ^D)"
    puts "to suspend, press appropriate job control sequence"
    puts "to return to process, enter: return"
    interpreter -eof exit
    puts "returning ..."
}

# interactively query user to choose process, return pid
proc choose {} {
    while {1} {
	send_user "enter # or pid: "
	expect_user -re "(.*)\n" {set buf $expect_out(1,string)}
	if {[info exists ::index($buf)]} {
	    set pid $::index($buf)
	} elseif {[info exists ::date($buf)]} {
	    set pid $buf
	} else {
	    puts "no such # or pid"
	    continue
	}
	return $pid
    }
}

if {$argc} {
    # initial creation occurs before fork because if we do it after
    # then either the child or the parent may have to spin retrying
    # the fifo open.  Unfortunately, we cannot know the pid ahead of
    # time so use "0".  This will be set to the real pid when the
    # parent does its initial disconnect.  There is no collision
    # problem because the fifos are deleted immediately anyway.

    set datearg [clock format [clock seconds]]

    fifo_pair_create 0 $datearg $argv

    # to debug by faking child, comment out fork and set pid to a
    # non-zero int, then you can read/write to pipes manually

    set pid [fork]
    say "after fork, pid = $pid"
    if {$pid==0} {
	child $datearg $argv
    }

    # parent thinks of child as pid==0 for reason given earlier
    set pid 0
}

say "examining pid"

if {![info exists pid]} {
    global fifos date proc

    say "pid does not exist"

    pidfile_read

    set count 0
    foreach pid [array names date] {
	incr count
    }

    if {$count==0} {
	puts "no connectable processes"
	exit
    } elseif {$count==1} {
	puts "one connectable process: $proc($pid)"
	puts "pid $pid, started $date($pid)"
	send_user "connect? \[y] "
	expect_user -re "(.*)\n" {set buf $expect_out(1,string)}
	if {$buf!="y" && $buf!=""} exit
    } else {
	puts "connectable processes:"
	set count 1
	puts " #   pid      date started      process"
	foreach pid [array names date] {
	    puts [format "%2d %6d  %.19s  %s" \
		    $count $pid $date($pid) $proc($pid)]
	    set index($count) $pid
	    incr count
	}
	set pid [choose]
    }
}

say "opening [outfifoname $pid] for write"
spawn -noecho -open [open [outfifoname $pid] w]
set out $spawn_id

say "opening [infifoname $pid] for read"
set catfid [open "|cat $catflags < [infifoname $pid]" "r"]
set catpid [pid $catfid]
spawn -noecho -open $catfid
set in $spawn_id

puts "Escape sequence is $escape_printable"

proc prompt1 {} {
    return "$::argv0[history nextid]> "
}

rename exit exitReal

proc exit {} {
    exec /bin/kill $::catpid
    exitReal
}

interact {
    -reset $escape escape
    -output $out
    -input $in
}

Youez - 2016 - github.com/yon3zu
LinuXploit